一、不干膠試驗機用途：
電熱恒溫干燥箱主要用于物品的烘焙干燥，熱處理和加熱。工農業生產、科學研究、醫療衛生等單位試驗室均可使用，但不適用于揮發性物品、易燃物品，以免引起爆炸。

二、不干膠試驗機工作原理:
本機采用薄鋼板制作而成，工作室內有試品擱板，工作室與箱體外殼之間有保溫層，工作室的箱底設有進風孔，冷空氣從箱底流進，由箱頂排氣孔排出，兩組加熱組件分布于工作室的下部。根據需要可選擇使用，
箱內溫度由溫度傳感器及控溫儀控制。恒溫系統，熔斷器安裝于箱體的左側，并有活絡門裝置，維修較為方便。

不干膠試驗機控溫范圍:室溫+10～300℃
溫度波動:±1℃
工作電壓:220V
輸入功率:2.2KW
外形尺寸（高×寬×深）:830×850×640mm
工作室尺寸（高×寬×深）:550×550×450mm

Application:
Electric heat temperature drying chamber is used for heat processing or heating. It is widely used in labs of agricultural and industrial manufacture, scientific studying,
health and medical community. But it is not appliable to be used in volatility, flammability products in order to avoid explosion.

Work theory:
It is composed of the thin steel board, and there are shift in the testing space, and insulating layer between the working space and the outside layer. And there is fresh air inlet at the bottom
of the working space, the air comes in from it and discharges from the top. And the two groups of heating components are assembled in the bottom. The temperature is controlled by the sensor and
temperature controller. And the Temperature system and fuse box are assembled on the left, there is also active gate for convenience for maintain.

Temperature range: room temperature +10～300℃
Fluctuation: ±1℃
Input power: 2.2KW
Outside dimension: 830×850×640mm
Working space: 550×550×450mm