產品展示

Peppers防爆接頭附件（locknuts, earthtags, sealing washers

點擊瀏覽大圖收藏此產品

公司名稱：
更新時間：
所在地：
生產地址：
瀏覽次數：

上海頤品自動化科技有限公司
2025-06-25 11:12:22
上海
上海頤品自動化，熱線：13818772521
1295

【簡單介紹】

EPIN英國Peppers防爆格蘭，英國Peppers防爆變徑接頭，英國Peppers防爆堵頭，英國Peppers防爆呼吸閥，英國Peppers防爆密封接頭，英國Peppers防爆螺紋適配接頭，上海頤品自動化，技術：

【詳細說明】

英國Peppers防爆堵頭，防爆變徑，防爆呼吸閥Peppers cable Gland

上海頤品自動化，：

Including type No’s:

A	C	D	P	E	*
					B
					S
					N
					A

ACDPE Series Breather Drain provides a method of effectively draining any moisture within an enclosure whilst allowing the air inside the enclosure to breathe with the surrounding atmosphere. ACDPE series breather drains maintain Increased Safety Exe method of explosion protection and IP66 for IEC type applications.

CERTIFICATION

CENELEC
SIRA99ATEX3050U I M2 II 2DG EExe I/II; II 2DG E
Exe (Glass Filled Nylon and Aluminium)

CSA / A Ex
Class I, Zone 1, Exe II; Class I Division 2, Groups ABCD

GOST R-Exe II
POCC GB MΠ14.B00030

IECEx Ex e II
IECEx SIR 08.00244

APPLICATIONS

Internal Dust Seal provides ingress protection to IP66 and 4x, with the largest possible pore size to aid draining, whilst retaining filtration capabilities that remove debris from the moisture and retains it on the surface where it can easily be removed with compressed air. Additionally the structural strength and chemical resistance characteristics of the material enable the filter to meet the requirements of hazardous area installations

Caslated Locknut allows moisture to pass between the locknut and the enclosure, draining via holes in the thread without any build up of moisture in the bottom of the enclosure

Captive ‘O’ Ring Seal is located within a recess on the face of the breather drain again optimising ingress protection, ensuring the ‘o’ring is not displaced during installation and helping protect the ‘O’ ring from the environmental damage

External Drainage via two ports optimises ingress protection without compromising the draining capabilities

INGRESS
PROTECTION

IP66, CSA Enclosure Type 4x, NEMA 4x

IMPACT RESISTANCE

20Nm. (7Nm GF Nylon and Aluminium)

OPERATING TEMPERATURES

-50ºC to +85ºC

MATERIALS

Brass CZ121 (ACDPEB)
316 Stainless Steel (ACDPES)
Aluminium Alloy (ACDPEA)
30% Glass Filled Nylon (ACDPEN)

VARIATIONS

Clearance hole (10): 10mm length of thread, supplied complete with a caslated locknut and having 2 holes in the thread wall positioned directly opposite each other

Threaded Entry: 15mm length of thread, either supplied with or without caslated locknut and having 3 holes in the thread wall, offset to provide a 9mm range to accommodate differing wall thickness’

THREADS

ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel); PG

SEALS

The standard ‘O’ Ring material is Nitrile

PLATING

Zinc (ZP); Nickel (NP); Tin (TP); Electroless Nickel (EN)

EXAMPLE PART NUMBER

Sample: ACDPEb/NP/M20/15
ACDPEb - Breather Drain type and material (Brass)
NP - Nickel plating
M20 - Male thread size
15 - Male thread length (15mm) and drain holes in thread (x 3 offset)

DIMENSIONS
Size	Hex A/F	Hex A/C	Thread Length	Head Length

M20 - 1.2?h NPT	28.6mm	32.9mm	10 (2 Hole) or 15 (3 Hole)	15mm
M25 - 3.4?hNPT	34.9mm	40.2mm

All Dimensions are in Millimetres

NOTES:

30% glass filled nylon variations are only available with 15mm length of thread version and are supplied with or without a brass caslated nut
Installation instructions are supplied with the breather drain, the instructions must be read prior to installation and adhered to in full
Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch
Where metallic breather drains are fitted into non-metallic Increased Safety Exe enclosures they must be included within the earth circuit of the system

Part of our Accessories Range
2008 Catalogue Page 7.4.1

A full range of accessories including locknuts, earthtags, sealing washers, serrated washers and shrouds for use with all our cable glands

AVAILABILITY

ACCESSORY TYPE

GLAND TYPES/SIZE

THREAD TYPES
THREAD TYPES	THREAD TYPES	THREAD TYPES	THREAD TYPES	THREAD TYPES

Locknuts provide a method of securing a threaded entry component into a piece of equipment
Brass (ACBLN)	All	M16 to M100	1/2" to 4"	1/2" to 4"	PG7 to PG48	F48
316 Stainless Steel (ACSLN)	316 Stainless Steel	M16 to M100	1/2" to 4"	1/2" to 4"	PG7 to PG48	F48
Aluminium Alloy (ACALN)	Aluminium	M20 to M63	-	-	-	-
Nylon (ACNLN)	Nylon	M20 to M63	-	-	PG7 to PG48	-
Earth Tags provide an earth bond connection for an entry component
Brass (ACBET)	All	M16 to M100	1/2" to 4"	1/2" to 4"	PG7 to PG48	F48
Aluminium Alloy (ACAET)	Aluminium	M20 to M63	-	-	-	-
IP Sealing Washers are fitted between an entry component and the equipment to maintain the IP rating of the equipment
Nylon (ACNSW)	All	M16 to M100	/2" to 4"	/2" to 4"	PG7 to PG48	F48
Red Fibre (ACFSW)	All	M20 to M75	-	-	-	-
Serrated Star Washers can be used in conjunction with a locknut to provide additional fixing security and improve bonding
316 Stainless Steel (ACSLN)	All	M16 to M100	1/2" to 4"	1/2" to 4"	PG7 to PG48	F48
Shrouds can be used to protect the gland from the surrounding environment
PVC (ACSPVC)	16 to 100	Shrouds are not available for all glands, please see specific gland page for exact details
PCP (ACSPCP)	16 to 85
LSOH (ACSSIO)	16 to 85

NOTES:

As standard ISO Metric threads are supplied with a 1.5mm pitch up to and including M75 and a 2.0mm pitch for sizes above M75

中國區分銷商：
上海頤品自動化科技有限公司
Shanghai Epin Automation Co.,Ltd.

Website:www.epinautomation。。ｃｏｍ
:sales@epinautomation.com
*:

因為專業，所以放心！


留言框
感興趣的產品：	*
留言內容：
您的姓名：	*
您的單位：
聯系電話：	*
微信：
常用郵箱：
詳細地址：
省份：	*
驗證碼：	* = 請輸入計算結果（填寫阿拉伯數字），如：三加四=7
是否接受其他廠商報價:	* 匹配（1-3家）不接受